PRTG Manual: HPE 3PAR Common Provisioning Group Sensor
<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: HPE 3PAR Common Provisioning Group Sensor
The HPE 3PAR Common Provisioning Group sensor monitors the capacity of a Common Provisioning Group (CPG) on an HPE 3PAR storage system.
HPE 3PAR Common Provisioning Group Sensor
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
Sensor in Other Languages
Dutch: HPE 3PAR Common Provisioning Group
French: HPE 3PAR Common Provisioning Group
German: HPE 3PAR Common Provisioning Group
Japanese: HPE 3PAR Common Provisioning Group
Portuguese: HPE 3PAR Common Provisioning Group
Russian: HPE 3PAR Common Provisioning Group
Simplified Chinese: HPE 3PAR Common Provisioning Group
Spanish: HPE 3PAR Common Provisioning Group
Remarks
This sensor requires credentials for HPE 3PAR in settings that are higher in the object hierarchy, for example, in the settings of the parent device.
This sensor supports the IPv6 protocol.
This sensor has a very low performance impact.
This sensor uses lookups to determine the status values of one or more channels. This means that possible states are defined in a lookup file. You can change the behavior of a channel by editing the lookup file that the channel uses. For details, see section Define Lookups.
The Add Sensor dialog appears when you manually add a new sensor to a device. It only shows the settings that are required to create the sensor. You can change nearly all settings on the sensor's Settings tab after creation.
HPE 3PAR Specific
Setting
Description
Common Provisioning Group
Select the CPGs that you want to monitor.
Enable check boxes in front of the respective lines to select the items. Use the check box in the table header to select all items or to cancel the selection. In large tables, use the search function in the upper-right corner.
Basic Sensor Settings
Click the Settings tab of a sensor to change its settings.
If the name contains angle brackets (<>), PRTG replaces them with braces ({}) for security reasons. For more information, see the Knowledge Base: What security features does PRTG include?
This setting is for your information only. You cannot change it.
Tags
Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.
It is not possible to enter tags with a leading plus (+) or minus (-) sign, nor tags with parentheses (()) or angle brackets (<>).
For performance reasons, it can take some minutes until you can filter for new tags that you added.
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
cpg
hpe
hpe3par
rest
Priority
Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority () to the highest priority ().
HPE 3PAR Specific
HPE 3PAR Specific
Setting
Description
Name
Shows the name of the CPG that this sensor monitors.
PRTG shows this value for reference purposes only. If you need to change this value, add the sensor anew.
ID
Shows the ID of the CPG that this sensor monitors.
PRTG shows this value for reference purposes only. If you need to change this value, add the sensor anew.
Virtual Domain
Shows the virtual domain to which the CPG that this sensor monitors belongs.
PRTG shows this value for reference purposes only. If you need to change this value, add the sensor anew.
Sensor Display
Sensor Display
Setting
Description
Primary Channel
Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.
You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
Graph Type
Define how different channels are shown for this sensor:
Show channels independently (default): Show a graph for each channel.
Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic. You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
Stack Unit
This setting is only visible if you enable Stack channels on top of each other as Graph Type. Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.
Debug Options
Debug Options
Setting
Description
Result Handling
Define what PRTG does with the sensor result:
Discard result: Do not store the sensor result.
Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file name is Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites this file with each scanning interval.
This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance.
In a cluster, PRTG stores the result in the PRTG data directory of the master node.
Inherited Settings
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.
The minimum scanning interval of this sensor is 1 minute.
The recommended scanning interval of this sensor is 5 minutes.
Scanning Interval
For more information, see section Root Group Settings, section Scanning Interval.
Schedules, Dependencies, and Maintenance Window
You cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.
Schedules, Dependencies, and Maintenance Window
For more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window.
Access Rights
Access Rights
For more information, see section Root Group Settings, section Access Rights.
Channel Unit Configuration
Which channel units are available depends on the sensor type and the available parameters. If no configurable channels are available, this field shows No configurable channels.
Channel Unit Configuration
For more information, see section Root Group Settings, section Channel Unit Configuration.
Channel List
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
Channel
Description
Downtime
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status
Logical Space Free
The free logical space
Logical Space Free %
The free logical space (%)
Logical Space Total
The allocated logical space
Logical Space Used
The space that is already in use
Snapshot Space Free
The free snapshot space
Snapshot Space Free %
The free snapshot space (%)
Snapshot Space Total
The allocated snapshot space
Snapshot Space Used
The snapshot space that is already in use
State
The CPG status
Up status: Normal
Warning status: Degraded
Down status: Failed
Unknown: Unknown
This channel is the primary channel by default.
User Space Free
The free user space
User Space Free %
The free user space (%)
User Space Total
The allocated user space
User Space Used
The user space that is already in use in gigabytes
More
KNOWLEDGE BASE
Where can I find the Web Services API (WSAPI) port for the connection to the HPE 3PAR system?